Skip to main content

ETS-Lindgren integrates the R&S CMX500 for 5G wireless device test requirements

The R&S CMX500 radio communication tester from Rohde & Schwarz brings extensive device testing capabilities to the market, covering standalone (SA), non-standalone (NSA), TDD, FDD, FR1 and FR2.

ETS-Lindgren is integrating the R&S CMX500 radio communication tester to offer turnkey 5G test solutions to its customers. Pairing the R&S CMX500 with ETS-Lindgren’s CTIA-compliant EMQuest™ Antenna Measurement software and regulatory-compliant TILE!™ emissions and immunity software will provide comprehensive 5G OTA and EMC/EMI test capabilities.

The R&S CMX500 provides support for all 5G NR modes including FR1 (sub6 GHz) and FR2 (mmW), non-standalone (NSA) and standalone (SA), for both FDD and TDD. The R&S CMX500 works seamlessly with the R&S CMW500 wideband radio communication tester, the industry standard for cellular (LTE, C-IoT, 3G, 2G) and connectivity (WLAN, Bluetooth®) testing.  The combination of the R&S CMX500 with the R&S CMW500 provides complete coverage of all major commercial wireless technologies.

“5G NR is one of many radio access technologies that needs to be tested on the next generation of wireless devices,” says Jari Vikstedt, Director Wireless Solutions with ETS-Lindgren. “The ability to upgrade an existing ETS-Lindgren Wireless OTA and EMC/EMI test system to support 5G NR with the simple addition of a R&S CMX500 gives our customers the easiest and most cost-effective way to enable 5G testing.”

“Different from other solutions on the market, the R&S CMX500 was designed from the ground-up to meet all of the diverse testing needs of 5G with a single solution,” says Michael Thorpe, Product Manager, Rohde & Schwarz. ”We are excited to be partnering with ETS-Lindgren to bring 5G NR OTA and EMC testing capabilities to the market.”

To receive more information on the R&S CMX500 radio communication tester and to learn about related solutions, go to: http://bit.ly/2WEutG4

Press contacts:

North America: Keith Cobler (phone: +1 214 663 6394; email: keith.cobler@rsa.rohdeschwarz.com)

Europe (headquarters): Christian Mokry (phone: +49 89 4129 13052; email: press@rohde-schwarz.com)

Asia Pacific: Wen Shi Tong (phone: +65 6 307-0029; email: press.apac@rohde-schwarz.com)

Contacts for readers:

Customer Support Europe, Africa, Middle East: +49 89 4129 12345
customersupport@rohde-schwarz.com

Customer Support North America: +1 888 TEST RSA (+1 888 837 87 72)
customer.support@rsa.rohde-schwarz.com

Customer Support Latin America: +1 410 910 79 88
customersupport.la@rohde-schwarz.com

Customer Support Asia Pacific: +65 65 13 04 88
customersupport.asia@rohde-schwarz.com

Customer Support China: +86 800 810 8228 or +86 400 650 5896
customersupport.china@rohde-schwarz.com

About ETS-Lindgren

ETS-Lindgren is an international manufacturer of components and systems that measure, shield, and control electromagnetic and acoustic energy. The company’s products are used for electromagnetic compatibility (EMC), microwave and wireless testing, electromagnetic field (EMF) measurement, radio frequency (RF) personal safety monitoring, magnetic resonance imaging (MRI), and control of acoustic environments.

Headquartered in Cedar Park, Texas, ETS-Lindgren has manufacturing facilities in North America, Europe and Asia. The company is a wholly owned subsidiary of ESCO Technologies, a leading supplier of engineered products for growing industrial and commercial markets. ESCO is a New York Stock Exchange listed company (symbol ESE) with headquarters in St. Louis, Missouri. Additional information about ETS-Lindgren is available at www.etslindgren.com. Additional information about ESCO and its subsidiaries is available at http://bit.ly/1nYOv81.



from Electronics Maker http://bit.ly/2WLJh5X

Comments

Popular posts from this blog

TE Connectivity Announced Ultra Small Spring Fingers

TE Connectivity (TE)’snew ultra small spring fingers have one of the smallest footprints in the market to save valuable PCB space, allowing for use in a broad range of applications with space constraints across various industries.TE’s ultra small spring fingerscan save valuable PCB space with one of the smallest footprints in the market. Closed-loop contact design ensures reliable connection to the PCB, better normal force and higher current capacity (1.5A). Robust side wall minimizes over- compression. Special anti-lifting design can improve assembly e ciency by locking the tip of the contact within the sidewall of the spring  nger, which helps prevent the contact from getting caught on an operator’s glove during assembly. Pick-and-place area supports auto-assembly processes. It also offered in different heights and styles.As an authorized distributor for TE Connectivity, Heilind Asia provides TE’s products and also value added services. Heilind Asia supports both original equipment …

Hanwha TechwinCollects Two NPI Awards for Its Cutting-Edge Modular Mounter and Screen Printer at APEX

Hanwha Techwin Automation Americas, formerly Samsung C&T Automation, today announced that it has received two 2019 NPI Awards in the categories of Component Placement – High-Speed for its HM520 Cutting-Edge Modular Mounter and Screen/Stencil Printing for the ESE US-2000XF. The awards were presented to the company during a Tuesday, Jan. 29, 2019 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO.With the HM520 Modular Mounter, actual productivity is highest among machines of the same class and is optimized to high quality production. The system configures a flexible production line by applying a modular head and various production modes. The HM520 realizes unmanned, non-stop, and zero-defect production using the Smart Factory S/W Solution.The high performance HM520 offers a compact foot print, auto-calibrating maintenance free feeders, and modular heads. The HS(High Speed) Head offers a 20 Spindle x 2 Gantry, 80,000 CPH, ±25 μm @ Cpk ≥ 1.0, 0201 ~ …

Siemens partners with TIES, a Chinese R&D Center to develop new technologies for electric vehicle batteries

Advanced Battery Technology Innovation Center (ABTIC) is initiated jointly by Tianmu Lake Institute of Advanced Energy Storage and Siemens to develop advanced battery technologies and help bring them to volume productionABTIC aims to develop and provide digital solutions for production chains and innovation chains on next generation batteriesSiemens Digital Industries Software has partnered with Tianmu Lake Institute of Advanced Energy Storage Technologies (TIES), a major Chinese energy storage research and development center, to build an Advanced Battery Technology Innovation Center. The Innovation Center, to be located at the 500 million-yuan, 51,000 square meter TIES facility in Liyang, China, will be dedicated to transforming and upgrading the advanced battery industry, including nurturing advanced battery technology research and development, and the development and introduction of high-end talents in this growing area.The Innovation Center will provide the advanced battery innova…