Skip to main content

Siemens partners with TIES, a Chinese R&D Center to develop new technologies for electric vehicle batteries

  • Advanced Battery Technology Innovation Center (ABTIC) is initiated jointly by Tianmu Lake Institute of Advanced Energy Storage and Siemens to develop advanced battery technologies and help bring them to volume production
  • ABTIC aims to develop and provide digital solutions for production chains and innovation chains on next generation batteries

Siemens Digital Industries Software has partnered with Tianmu Lake Institute of Advanced Energy Storage Technologies (TIES), a major Chinese energy storage research and development center, to build an Advanced Battery Technology Innovation Center. The Innovation Center, to be located at the 500 million-yuan, 51,000 square meter TIES facility in Liyang, China, will be dedicated to transforming and upgrading the advanced battery industry, including nurturing advanced battery technology research and development, and the development and introduction of high-end talents in this growing area.

sgThe Innovation Center will provide the advanced battery innovation chain and industry chain with comprehensive digital services, including design and simulation, test and analysis, pilot verification and engineering simulation. Meanwhile, the Innovation Center will also provide manufacturing enterprises, both domestic and abroad, with high-quality professional digital transformation services, including digital construction and digital manufacturing construction consulting services for medium- and large-sized enterprises, implementation of complete solutions for digital enterprises, as well as the development of digital capabilities for and shared lab leases for small and micro businesses. In doing so, this center can enable advanced research in battery technology, drive collaboration throughout the supply chain, and allow partners to develop the leading-edge battery technologies required for enhanced range with future electric vehicles.

“As the first digital innovation center in battery field we aim to provide comprehensive digital solutions for the innovation chain and production chain, from first principle calculation to digital twin factory, from materials to systems,” said Professor Hong Li, Chief Executive Officer, at TIES. “This target is difficult to be realized but certainly worthy for long-term effort. Based on digital solutions, we believe we can understand the complex batteries and their processing precisely and produce the new batteries with unprecedented quality and reliability.”

c“China is fast emerging as a peer to those countries long known as leaders in battery innovation, in part due to much concerted government and private investment, of which this Siemens-TIES partnership is a prime example,” said Pei Huang, CEO and Chief Analyst, at e-works, the leading media and research organization in Smart Manufacturing area in China. “The rise of China as an energy storage powerhouse is part of the much larger story of its dominance in the electric vehicle market, where it accounts for half of all EV sales globally and is expected to lead for decades to come. Given the breadth of Siemens Digital Industries Software, with enabling technologies serving most stages of the battery design, simulation and production process, also its deep relationships with EV market leaders in China and beyond, it’s no surprise TIES leadership selected Siemens as its key partner and supplier supporting this new center.”

Launched in April 2019, TIES was set up jointly by the Institute of Physics, Chinese Academy of Science and Jiangsu Zhongguancun Technology Park (Z-Park) for developing the new battery technologies and providing high quality customized services. The ABTIC Innovation Center is planned to open by the end of 2019. It is the first Innovation Center focused on advanced battery technology, and it is the first center in China to provide comprehensive third-party testing, research and development, verification and technology services to the battery industry. Much of China’s burgeoning battery ecosystem, including both domestic and international companies like CATL and LG Chem, is clustered within a few hundred kilometers of Liyang.

 zc“Investing in the ABTIC Innovation Center is a key step forward in helping our customers develop advanced battery technologies, said Leo Liang, Country Manager for China at Siemens Digital Industries Software. “Battery design and manufacturing need to be tightly aligned due to product complexity, and the Innovation Center will focus both on the technology incubation and development as well as advanced manufacturing techniques. Bringing these two key drivers together can help our partners have a competitive market advantage in developing batteries for electric vehicles.”

Siemens Digital Industries Software is driving transformation to enable a digital enterprise where engineering, manufacturing and electronics design meet tomorrow. Our solutions help companies of all sizes create and leverage digital twins that provide organizations with new insights, opportunities and levels of automation to drive innovation. For more information on Siemens Digital Industries Software products and services, visit www.sw.siemens.com or follow us on LinkedIn, Twitter, Facebook and Instagram. Siemens Digital Industries Software – Where today meets tomorrow.

This press release is available at
https://sie.ag/2lOr0Hk

Follow us on Twitter at: http://www.twitter.com/siemensplm



from Electronics Maker https://ift.tt/2kK3kDP

Comments

Popular posts from this blog

TE Connectivity Announced Ultra Small Spring Fingers

TE Connectivity (TE)’snew ultra small spring fingers have one of the smallest footprints in the market to save valuable PCB space, allowing for use in a broad range of applications with space constraints across various industries.TE’s ultra small spring fingerscan save valuable PCB space with one of the smallest footprints in the market. Closed-loop contact design ensures reliable connection to the PCB, better normal force and higher current capacity (1.5A). Robust side wall minimizes over- compression. Special anti-lifting design can improve assembly e ciency by locking the tip of the contact within the sidewall of the spring  nger, which helps prevent the contact from getting caught on an operator’s glove during assembly. Pick-and-place area supports auto-assembly processes. It also offered in different heights and styles.As an authorized distributor for TE Connectivity, Heilind Asia provides TE’s products and also value added services. Heilind Asia supports both original equipment …

Hanwha TechwinCollects Two NPI Awards for Its Cutting-Edge Modular Mounter and Screen Printer at APEX

Hanwha Techwin Automation Americas, formerly Samsung C&T Automation, today announced that it has received two 2019 NPI Awards in the categories of Component Placement – High-Speed for its HM520 Cutting-Edge Modular Mounter and Screen/Stencil Printing for the ESE US-2000XF. The awards were presented to the company during a Tuesday, Jan. 29, 2019 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO.With the HM520 Modular Mounter, actual productivity is highest among machines of the same class and is optimized to high quality production. The system configures a flexible production line by applying a modular head and various production modes. The HM520 realizes unmanned, non-stop, and zero-defect production using the Smart Factory S/W Solution.The high performance HM520 offers a compact foot print, auto-calibrating maintenance free feeders, and modular heads. The HS(High Speed) Head offers a 20 Spindle x 2 Gantry, 80,000 CPH, ±25 μm @ Cpk ≥ 1.0, 0201 ~ …