Skip to main content

Posts

Showing posts from October, 2019

Enginursday: Building a Wireless EL Wire Dance Suit, Part 3

Note: If you have not read my previous blog posts, make sure to check it out before reading further!

Enginursday: Building a Wireless EL Wire Dance Suit, Part 1April 25, 2019 FavoritedFavorite2 Enginursday: Building a Wireless EL Wire Dance Suit, Part 2July 18, 2019 FavoritedFavorite0 As with any project, you will want to start small and work on the project in parts. In this case, my initial goal was to built one suit for Mark IV before making six more for each student. This has been an ambitious goal of mine since making the first version for my students back in 2014. Mark I: EL Dance Shirt in 2014 Once I created the EL suits for each student, I decided to move forward to the next goal and control two channels wirelessly. Satisfied with a wireless blink test on a breadboard between a controller and one sequencer, I tested the setup remotely with a wireless glove and three sequencers. After a few successful tests, off I went to modify the EL Sequencers, hacking the EL inverters, making custo…

8 Last Minute 3D Prints To Spookify Your Halloween

Makers usually love Halloween. What’s not to love? Spooky images, fantastic costumes, frolicking in the chilly fall dusk. It really is a wonderful holiday. However, many of us just have so much going on, we can’t celebrate to the extent we’d like. Maybe you live in a dorm, maybe you’ve […]Read more on MAKEThe post 8 Last Minute 3D Prints To Spookify Your Halloween appeared first on Make: DIY Projects and Ideas for Makers.

from Make: DIY Projects and Ideas for Makers https://ift.tt/2NqtS7z

Maxim Provides Industry’s First and Only Automotive-Grade Secure Authenticator to Enhance Vehicle Safety

DS28C40 improves automotive reliability and data integrity by verifying genuine component use in ADAS, EV batteries and other electronic systems.MUNICH, Germany – October 31, 2019 – Designers can now enhance safety, security and data integrity for connected vehicle systems while also reducing both complexity and code development time with the DS28C40 DeepCover® automotive secure authenticator from Maxim Integrated Products, Inc. (NASDAQ: MXIM). As the industry’s first and only AEC-Q100 Grade 1 solution for automotive systems, this authenticator IC reduces the design complexity and software vulnerability of current approaches to ensure only genuine components are used for many electronic systems, such as advanced driver assistance systems (ADAS) and electric vehicle (EV) batteries.
As cars become more sophisticated with the features they offer, safety and security risks grow as well. Automotive manufacturers use authentication to ensure only OEM-certified components are safely connecte…

HID Global balances high security with ease of implementation and custom design capabilities

HID Global participated at Smart Card Expo from Sep 25th to 27th. HID Global for the first time in India unveiled its latest ID card retransfer printer, HID® FARGO® HDP6600 High Definition Printer/Encoder with breakthrough speed as well as GreenCircle® certification and the HID FARGO® Connect, an industry’s first cloud-based solution that simplifies and streamlines the issuance of ID cards as well as credentials.  HID Global also featured its OMNIKEY® Readers, HID® Lumidigm® V-series Fingerprint Sensors and Modules, iCLASS SE® and HID® DigitalPersona Single Fingerprint Modules and Readers that help with tracking, Electronics Maker got the opportunity to meet HID team and explore the solutions. Here is the interview with Mr. Lalit Agarwal, Sales head, South Asia Secure Issuance, HID explains more about HID products innovations and application.According to you which are the new technologies evolving in smart card products?We are currently seeing good traction for smart cards in the bank…

New Keithley SMU Modules Solve Tough Test Challenges Involving Low Current, High Capacitance

Modules for Keithley 4200A-SCS Parameter Analyzer Ideal for Applications with High Test Connection Capacitance, Unstable Low Current Measurements BEAVERTON, Ore., Oct. 29, 2019 — Tektronix, Inc. today announced the availability of two new source measure unit (SMU) modules for the Keithley 4200A-SCS Parameter Analyzer that can perform low-current measurements even in the presence of high load capacitance due to long cables and complex test setups. Among the notable test applications facing this challenge are LCD display manufacturing and nano FET device testing on a chuck.The new 4201-SMU and 4211-SMU are designed specifically for test setups with long cables, switch matrices, gate contacts to the chuck, and other fixturing. Such test setups, which are required in a number of low current measurement applications, can increase the capacitance seen at the output of the SMU, even though the device under test itself has very low capacitance. When the test connection capacitance is too high…

Renesas Electronics Joins the Autonomous Vehicle Computing Consortium to Speed Autonomous Driving Vehicle Development

Collaboration Will Build Standard Framework in Vehicle Edge Computing and Accelerate Development of Autonomous Vehicles30 Oct 2019TOKYO, Japan – Renesas Electronics Corporation (TSE:6723), a premier supplier of advanced semiconductor solutions, today announced it has joined the Autonomous Vehicle Computing Consortium (AVCC) as a core member. Renesas joins leaders from across the automotive ecosystem, including vehicle OEMs, Tier1 suppliers, and other semiconductor suppliers to help solve some of the most significant challenges of deploying self-driving vehicles at scale.As the automotive industry pushes forward to meet the needs of an increasingly connected environment, vehicles are evolving to become more intelligent, more ecologically friendly, and more affordable. Looking ahead, future autonomous vehicles will be operated with even more complicated and large-scale software driven by artificial intelligence. Vehicle edge computing platforms will play a key role in achieving the requ…

Inkers.ai bags the 1st prize at DRDO’s Dare to Dream Innovation Contest as the Technology Leader for Empowering India

Monalisa Das, Head of Strategic Initiatives – Inkers Technology Pvt. Ltd. wins the 1st prize in the DRDO Dare to DreamInnovation contest in the start-up category for designing a real-time 3D reconstruction technology to provide autonomous navigation and hostile territory 3D capturing features to a Swarm of Drones. Inkers Technology founded by Rohan Shravan and Manish Giri is a pioneer in cutting edge technologies since 2015. The IIT Kharagpur alumni duo express their proud privilege to be recognized as the Technology Leader in Empowering India by contributing in the development of advanced technologies for the Indian Defence System.While presenting the award to Monalisa Das (Head- Strategic Initiatives and Innovation), Hon. Defence Minister Shri Rajnath Singh paid tribute to former President A P J Abdul Kalam and said “Let us get inspired by his life and work towards realizing his dream of making India a developed country through scientific advancement”. He also pitched for working on…

Mouser Electronics Stocks Full Qorvo Active-Semi Portfolio

October 30, 2019 – Mouser Electronics, Inc., an authorized global distributor of Qorvo products, is pleased to announce that it is stocking the Active-Semi line of products. The programmable power management solutions provide customers with compelling simplicity, efficiency and design flexibility, resulting in smaller footprints, lower bill of material costs, and reduced time to market.Qorvo, a leading provider of innovative RF solutions that connect the world, recently acquired Active-Semi as part of Qorvo’s Infrastructure and Defense Products (IDP) group. With the addition of Active-Semi products, Qorvo gains a portfolio of analog and mixed signal systems-on-chips (SoCs) used in charging, powering and embedded digital control systems for end applications, such as industrial, commercial and consumer equipment. Qorvo’s power management products include power application microcontrollers, DC/DC, AC/DC, PMU and LED drivers that significantly reduce solution size and cost while improving…

Indium8.9HF delivers versatility and stability in the printing process

Mr. Jonas Sjoberg, Technical Manager, Indium CorporationIndium Corporation exhibited at Productronica India from September 25-27, in Greater Noida and featured their newly introduced Indium8.9HF solder paste. Electronics Maker got the opportunity to meet their top management to know more about Indium products, technical innovations and  applications. Here is the exclusive interview with Mr. Chris Nash, Product Manager, PCB Materials, Indium Corporation and Mr. Jonas Sjoberg, Technical Manager,  Indium Corporation.Tell us something about Indium Corporation.Indium Corporation was founded in 1934 in Utica, N.Y. by Dr. William S. Murray—a man who dedicated his life to investigating and developing the uses of indium metal. Since those early days, the company has continued to lead and support the advancement of technologies uponwhich we rely today.Indium Corporation is a premier materials supplier to the global electronics, semiconductor, thin-film, thermal management, and solar markets. Pr…

Renesas Premieres RE Family For Its SOTB™ Process-Based Energy Harvesting Embedded Controller Portfolio

New Evaluation Kit Provides Powerful Support for the Development of Battery Maintenance Free IoT EquipmentEnergy Harvesting Embedded Controller “RE Family”TOKYO, Japan ― Renesas Electronics Corporation (TSE:6723), a premier supplier of advanced semiconductor solutions, today introduced its RE Family, which encompasses the company’s current and future lineup of energy harvesting embedded controllers. The RE Family is based on Renesas’ proprietary SOTB (Silicon on Thin Buried Oxide) process technology, which dramatically reduces power consumption in both the active and standby states, eliminating the need for battery replacement or recharging.Following the mass production of the RE01 Group (formerly known as the R7F0E embedded controllers), the first of the RE Family, the new RE01 Group Evaluation Kit was launched today, which allows users working with the RE01 Group of devices to jump start system evaluations for energy harvesting applications.“Energy harvesting eliminates the labor an…

Analog Devices Introduces Software-Configurable Analog Front End With Integrated ADC for Industrial Process Control Systems

New solution enables designers to create “platform” input modules for multiple product iterations, reducing cost and speeding time-to-marketOCTOBER 31, 2019 — Analog Devices, Inc., today introduced the AD4110-1 Analog Front End with integrated 24-bit ADC for industrial process control systems. AD4110-1 is a universal input AFE with an integrated ADC that allows customers to design a “platform” input module that they can configure for multiple functions. This saves significant R&D cost, reduces time to market and requires less design resources.View the AD4110-1 product page, download the data sheet and order samples: https://ift.tt/2MJOpU3Link to order Evaluation Board:https://ift.tt/2OQVogQThe high voltage inputs of the AD4110-1 are fully software configurable for current or voltage signals, allowing direct interface to all standard industrial analog signal sources. One reference design replaces many, reducing module size and decreasing cost of ownership. Software-configurable I/O…

40V, 2.2MHz Synchronous Buck Converters from Diodes Incorporated Deliver High Efficiency across All Loads

Plano, Texas – October 30, 2019 – Diodes Incorporated (Nasdaq: DIOD) today announced the introduction of five synchronous buck converters with integrated high- and low-side MOSFETs, providing point-of-load (PoL) solutions with a continuous output current of either 3.5A or 5A. The devices feature proprietary gate driver technology, delivering superior EMI performance in step-down DC-DC conversion for consumer, industrial, networking, and automotive applications.The AP64350, AP64351, and AP64352 operate with a quiescent current (Iq) of 22μA, while the Iq of the AP64500 and AP64501 is just 25μA. All devices feature low RDS(ON) and operate from a supply voltage of between 3.8V and 40V and provide a low dropout (LDO) mode. As well as the optimized gate driver design, the parts also employ a frequency spread spectrum topology to further reduce EMI.In addition, the AP64351 and AP64501 implement programmable soft-start, which can mitigate the effects of inrush currents as well as tracking, al…

Bel Magnetic Solutions Introduces Automotive Ethernet MagJack® ICMs

Bel Magnetic Solutions, a Bel group company (NASDAQ: BELFA and BELFB) and global leader in design and manufacturing of MagJack® Integrated Connector Modules (ICM), introduces a line of ICMs designed for automotive Ethernet applications. These single port 10/100BaseT/1GBaseT ICMs provide the ability to upgrade existing CAN bus signaling with Ethernet signaling and cables styles, suitable for driver-assist radar, infotainment, cameras and programable lighting applications.The automotive industry is swiftly moving to replace existing CAN bus signaling with Ethernet signaling and cabling styles. Ethernet is both faster in transmission speed and lighter in cable weight – driving the current trend of innovation and cost reductions in next generation vehicles. Bel’s automotive Ethernet ICM’s are the first SAE/USCAR2-6 compatible products in production with operating temperature ranges up to 100°C along with vibration withstand and sealing requirements. These ICMs are compatible with standard…

Press release for Seica China for productronica show Munich, PR for second booth – New Rapid system

OLYMPUS DIGITAL CAMERASeica SpA participates in the Munich Electronics Show news preview, November 12-15, 2019, Hall B3, New International Exhibition Center, Munich, Germany, booth B3-570In October 2019, Strabino, Italy. Unique Principle: Innovation is the standard of Seica Spa, and at the 2019 Electronics Show, visitors will see Seica’s latest and distinctive solutions.Automated processes are a common theme in all industries, and there are more and more specific themes in the field of printed circuit boards, which is related to the increasing proportion of electronic products in many products. These include flexible circuit boards, embedded components, ceramics and other alternative materials. Seica’s Rapid Flying Needle Test System series, exhibited at booth B0, Hall 570, meets all of these requirements with innovative solutions.The Rapid H8 Next> series of flying probes have eight fully independent test probes on either side of the PCB. There are 4 test probes on each side and, …

Constant Analysis Of Information To Generate Real-Time Insights Enhances The Value Of Data

Data analytics makes it easier for business users to interact, share and collaborate with data—which is the very essence of data literacy—regardless of where or how they work. Nish Patel, senior director, Qlik, discusses how data analytics can help optimise work and improve employee efficiency, in an interaction with Deepshikha Shukla. Q. Why are data […]The post Constant Analysis Of Information To Generate Real-Time Insights Enhances The Value Of Data appeared first on Electronics For You.

from Electronics For You https://ift.tt/2WrAiHH

Toy Inventor’s Notebook: Spin ’N Spill Balancing Bot game

Here’s a fun and easy action game: the Spin ’N Spill Balancing Bot. Stack the gears onto the tippy balancing robot — but be careful! If you cause him to drop or spill, you lose! This game is easy to make, especially if you have access to a laser cutter. […]Read more on MAKEThe post Toy Inventor’s Notebook: Spin ’N Spill Balancing Bot game appeared first on Make: DIY Projects and Ideas for Makers.

from Make: DIY Projects and Ideas for Makers https://ift.tt/31TKFoE

Check Out The Most Adorable Tiny Boiling Halloween Cauldron

Sometimes a collection of parts just comes together perfectly. I’m not sure what I find so captivating about this tiny cauldron from Adafruit, but it really struck me as fantastic. I’ve seen so many boiling cauldrons around Halloween, but the bluetooth connectivity and 3d prints being perfectly fit to a […]Read more on MAKEThe post Check Out The Most Adorable Tiny Boiling Halloween Cauldron appeared first on Make: DIY Projects and Ideas for Makers.

from Make: DIY Projects and Ideas for Makers https://ift.tt/36kzbhe

A Disaster and a Half

Every autumn deserves its pumpkin hacking projects. This Halloween, our pumpkin comes with a horror story. It began last year in early November. All the Halloween decorations were on clearance, and I found a plastic jack-o-lantern bucket for 15 cents. On first sight, I knew I must remote control it. Over the months following, the project came to my work bench now and then. I did simple things like cutting holes for the wheels, and mounted some of the mechanical things. Cutting the plastic with a utility knife was super easy.Around the end of September this year, I sifted through my scavenged collection of electronics and formulated a plan. I decided on some Bluetooth devices because I wanted to explore that technology. The particular board in my stockpile was discarded from the product development process (insert eerie sound effects here). I didn't know its history. I didn't know if it had the standard released bootloader. I didn't even know if it worked. I was driven to m…

Analog Devices Acquires Test Motors to Expand Condition-Based Monitoring Offerings for Industry 4.0

BANGALORE, India, October 30, 2019– Analog Devices, Inc. (ADI) today announced the acquisition of Test Motors, a company specializing in predictive maintenance of electric motors and generators.  Based in Barcelona, Spain, Test Motors offers products and services that detect faults in electric motors before they cause damage to production cycles and advises on how and when to repair them. The acquisition expands ADI’s portfolio of condition-based monitoring solutions capable of identifying equipment faults before downtime and catastrophic failure occur.This acquisition builds on Analog Devices’ 2018 addition of OtoSense, a startup that developed “sensing interpretation” software able to learn and recognize sounds or vibration and identify potential problems in a factory machine or a car’s engine before they become severe. OtoSense’s artificial intelligence (AI) platform is dedicated to sensing interpretation and enabling the monitoring of any asset, wherever located. Analog Devices pl…

New Compact, High-efficiency Power Inductors Optimized for 48 V Automotive Applications

Cary, IL, USA — Coilcraft’s new AGM2222 Series power inductors offer current ratings up to 110 Amps and very low DCR in a package measuring just 22 X 22 X 23 mm, a 73% volume reduction from previous-generation products. This significant improvement in power density makes the AGM2222 ideal for high-current applications including automotive bi-directional 12 V – 48 V DC-DC converters.The AGM2222 Series is available in 13 inductance values from 1.9 to 10 µH. It is qualified to AEC-Q200 Grade 1 (-40°C to 125°C ambient), making it ideal for automotive and other high-temperature applications. Soft saturation is stable over temperature and enables high peak current handling. Magnetic shielding reduces EMI at high switching frequencies.Like all Coilcraft products, complete technical specifications and free evaluation samples of the AGM2222 Series are available at www.coilcraft.com. Parts are available from stock and can be ordered on-line at buy.coilcraft.com or by calling a local Coilcraft s…

u-blox announces Bluetooth low energy module featuring direction finding, long range, and operation up to 105 °C

u-blox (SIX:UBXN), a global provider of leading positioning and wireless communication technologies, today announced the u-blox NINA-B4 Bluetooth low energy module series. Based on Nordic Semiconductor’s recently announced nRF52833 chip, NINA-B4 enables a number of Bluetooth features including Bluetooth long range, Bluetooth mesh, and Bluetooth direction finding. The module is fully tailored to the needs of applications in the connected industry, smart homes, buildings, and cities, asset tracking, and eHealth.The main highlight of the NINA-B4 series is Bluetooth’s new direction finding feature, a key component of the Bluetooth v5.1 specification that brings the benefits of high precision positioning to indoor applications. NINA-B4 is the first u-blox module designed to act as both a transmitter and a receiver in angle of arrival (AoA) and angle of departure (AoD) direction finding and indoor positioning applications.In AoA-based implementations, stationary beacons equipped with multi-…

Thermaltronics to Launch Two New Solder Robots at productronica 2019

GREAT NECK, NY — October 2019 — Thermaltronics USA, Inc. today announced plans to exhibit in Hall 4, Stand A305 at productronica, scheduled to take place Nov. 12-15, 2019 at the Neue Messe München in Munich, Germany. In addition to the award-winning TMT-R9800S Advanced Solder Robot System, Thermaltronics will launch two new additions to its product range.A single-head soldering robot, the new TMT-R8000S Solder Robot System is designed for simplified soldering applications. The new TMT-9900S Inline Soldering Robot System has been designed for those companies wishing to incorporate the system into an SMT production line where precision soldering is key.Both systems will include vision/mapping and dynamic laser height control, and will incorporate the same IP software used on the company’s successful benchtop system.Thermaltronics believes these three systems will provide companies with the best options when seeking to automate their hand soldering processes. A spokesperson for Thermaltr…