Skip to main content

Keysight Technologies, Integrated Device Technologies Collaborate on Component Characterization of 5G mmWave Beamforming Integrated Circuits

Keysight’s 5G solutions enable beamformer provider to accelerate performance validation of designs for 5G NR base stations

Bangalore, October 17, 2019 – Keysight Technologies, Inc. (NYSE: KEYS), a leading technology company that helps enterprises, service providers and governments accelerate innovation to connect and secure the world, announced an extended collaboration with Integrated Device Technologies, Inc. (IDT), a wholly owned subsidiary of Renesas Electronics Corporation (TSE: 6723), on component characterization of 5G new radio (NR) mmWave integrated circuit (IC) beamformers to accelerate development of 5G NR base stations.

Network equipment manufacturers (NEMs) use beamforming technology in 5G NR base stations to improve reliability and efficiency in the mmWave frequency spectrum. Beamforming uses multiple antennas (a phased array) to transmit the same signal, thereby increasing the signal strength to and from a chosen direction to extend cellular coverage, delivering higher data rates and an improved radio environment.

“Our close collaboration with Keysight enables us to validate that our 5G beamformers and other components deliver the high performance and low-power consumption essential for 5G network infrastructure equipment,” said Naveen Yanduru, vice president and general manager of IDT’s RF product division.

As the bandwidth of integrated circuits using 5G technology increases, it is important to characterize their performance over wider frequency ranges. This is why IDT uses Keysight’s high performance family of vector network analyzers (VNAs) to validate the performance of its beamformer ICs. Keysight solutions enable IDT, and other leading designers of ICs, to measure key parameters such as scattering (S) parameters, 1dB compression point (P1dB), third-order intermodulation products (IM3), and error vector magnitude (EVM).

“Our extended collaboration with IDT demonstrates how Keysight’s 5G beamformer IC test solutions enable designers of beamformers to validate performance using high precision measurement and simulation tools, ensuring reliable and efficient designs,” said Kailash Narayanan, vice president and general manager of Keysight’s wireless test group.

The two companies will use the Keysight Streamline USB VNA to demonstrate IDT’s active beamforming radio frequency integrated circuit (RFIC) for 5G NR at the 2019 IEEE International Symposium on Phased Array Systems and Technology (Array2019) taking place October 15 – 18, 2019 in Waltham, MA.

Earlier this year, at the world’s largest microwave and RF industry trade show – the International Microwave Symposium (IMS) 2019 – IDT showcased a 64-element phased array antenna comprised of its 5G NR beamformer ICs and wideband microwave synthesizer. The demonstration leveraged Keysight’s Signal Studio software for signal creation, the PXI vector signal generator for waveform generation and the UXA Signal Analyzer for vector signal analysis, enabling them to validate the signal fidelity performance of its beamforming IC.



from Electronics Maker https://ift.tt/2o3xFit

Comments

Popular posts from this blog

TE Connectivity Announced Ultra Small Spring Fingers

TE Connectivity (TE)’snew ultra small spring fingers have one of the smallest footprints in the market to save valuable PCB space, allowing for use in a broad range of applications with space constraints across various industries.TE’s ultra small spring fingerscan save valuable PCB space with one of the smallest footprints in the market. Closed-loop contact design ensures reliable connection to the PCB, better normal force and higher current capacity (1.5A). Robust side wall minimizes over- compression. Special anti-lifting design can improve assembly e ciency by locking the tip of the contact within the sidewall of the spring  nger, which helps prevent the contact from getting caught on an operator’s glove during assembly. Pick-and-place area supports auto-assembly processes. It also offered in different heights and styles.As an authorized distributor for TE Connectivity, Heilind Asia provides TE’s products and also value added services. Heilind Asia supports both original equipment …

Hanwha TechwinCollects Two NPI Awards for Its Cutting-Edge Modular Mounter and Screen Printer at APEX

Hanwha Techwin Automation Americas, formerly Samsung C&T Automation, today announced that it has received two 2019 NPI Awards in the categories of Component Placement – High-Speed for its HM520 Cutting-Edge Modular Mounter and Screen/Stencil Printing for the ESE US-2000XF. The awards were presented to the company during a Tuesday, Jan. 29, 2019 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO.With the HM520 Modular Mounter, actual productivity is highest among machines of the same class and is optimized to high quality production. The system configures a flexible production line by applying a modular head and various production modes. The HM520 realizes unmanned, non-stop, and zero-defect production using the Smart Factory S/W Solution.The high performance HM520 offers a compact foot print, auto-calibrating maintenance free feeders, and modular heads. The HS(High Speed) Head offers a 20 Spindle x 2 Gantry, 80,000 CPH, ±25 μm @ Cpk ≥ 1.0, 0201 ~ …

Maker Spotlight: Per Salkowitsch

This maker spotlight was brought to us through Maker Faire Rome.  You’ll be able to find them and many more creative and exciting makers at Maker Faire Rome: The European Edition on October 18-20. Get your tickets now! Who are you? I am an entrepreneur, musician, inventor, biologist and parent, […]Read more on MAKEThe post Maker Spotlight: Per Salkowitsch appeared first on Make: DIY Projects and Ideas for Makers.

from Make: DIY Projects and Ideas for Makers https://ift.tt/2l7GxSN