Skip to main content

Top Four Ways to Get Your MacBook Battery Replaced

Introduction:

Most MacBook or MacBook Pro’s have batteries that are good for around 300-1000 recharge cycles depending on the model you’ve got. Over time your battery starts running into serious problems with charge times, battery power and malfunctions. These are signs that it’s about time you replace your MacBook’s battery.

Here are a few options when it comes to battery replacement and steps to help you along the way.

Check the Battery Status of Your MacBook

To check the status of your battery, simply press the Option key and click the battery icon at the top of your screen. You’ll see one of four types of notes i.e. Normal (your battery does not need replacement), Replace Soon (your battery will require replacement soon/the battery holds less charge as compared to before), Replace Now (You battery needs replacement), or Service Battery (a fault has been detected in your battery).

This should give you an idea of whether or not your battery requires replacement. You can also view the number of charge + discharge cycles. For this, follow the steps below:

  • At the top left corner of the screen click on the Apple logo.
  • Next go to About This Mac > System Report.
  • Here select the Power tab, under Hardware
  • In the right panel, you will find the Cycle Count.

The number of cycles will give you an idea of how long your battery will last before it requires replacement. If your battery has reached its limit and has started to wear out it’s time to get rid of it. You can opt for one of these four options for battery replacement.

1: Use Apple Warranty

In case your MacBook is under warranty, you can easily get your battery replaced. Each Mac typically comes with a 1-year limited warranty in the US. For consumers in the EU and Australia, this consumer law extends to 2 years. You can also extend your warranty to 3 years with AppleCare+ (a bit expensive though).

You can check your warranty status online at https://checkcoverage.apple.com/ by using your serial number. In order to find your serial number:

  • Go to the top left corner and click the Apple icon.
  • Go to ‘About This Mac’.
  • You’ll find your serial number listed here.

In case you no longer have a warranty here are your other options.

2: Go to Apple Service Center

The next thing you could do is go to Apple’s Service Center. Getting your battery replaced by first-party or third-party authorized service centers can be expensive but is worth the cost. Apple also proves a ninety-day guarantee on any work done. The cost of repair can vary from $129 for a MacBook Air up to $199 for a MacBook Pro. For an outdated MacBook, it’s best to simply get your battery replaced.

Simply go to https://support.apple.com/mac/repair/serviceand click the ‘Start a service request’ option. In case there aren’t any Apple stores around your area, the website will instead suggest a list of third-party services that can help. These third-party services are authorized by Apple and so are trustworthy.

3: Go to a Computer Repair Shop

Getting your battery replaced from a third party source can save you some cash, although the cost depends on who you’re going to. However, you won’t have Apple’s guarantee on the battery being replaced. Third-party services may use foreign parts in an attempt to save money which is risky as such parts are prone to break down earlier. This does not always happen and you can try it out if you want to save some cash. Request for quotes from a computer repair shop around your area and then compare them to what Apple offers, the final decision is up to you.

4: Replace the Battery Yourself

This is the cheapest option by far, replace the battery yourself. You simply have to buy the parts and so the replacement yourself.For this, you’ll require a set of tools to open up your Mac, an anti-static wrist band and the replacement battery itself.

You can buy a kit from other sources such the iFixit which also comes with guides on simples fixes and more complex processes. For the battery, try to get a good quality battery from a trusted third-party source. Remember you’re taking a risk if you don’t know what you’re doing, but at the same time, you’ll save yourself a lot of money.

Once you’ve replaced your battery, make sure you dispose of the old battery responsibly. And if you still aren’t sure whether or not it’s worth getting your battery replaced you can always opt for external battery packs.

The post Top Four Ways to Get Your MacBook Battery Replaced appeared first on Electronics Lovers ~ Technology We Love.



from Electronics Lovers ~ Technology We Love https://ift.tt/34L8YqW

Comments

Popular posts from this blog

TE Connectivity Announced Ultra Small Spring Fingers

TE Connectivity (TE)’snew ultra small spring fingers have one of the smallest footprints in the market to save valuable PCB space, allowing for use in a broad range of applications with space constraints across various industries.TE’s ultra small spring fingerscan save valuable PCB space with one of the smallest footprints in the market. Closed-loop contact design ensures reliable connection to the PCB, better normal force and higher current capacity (1.5A). Robust side wall minimizes over- compression. Special anti-lifting design can improve assembly e ciency by locking the tip of the contact within the sidewall of the spring  nger, which helps prevent the contact from getting caught on an operator’s glove during assembly. Pick-and-place area supports auto-assembly processes. It also offered in different heights and styles.As an authorized distributor for TE Connectivity, Heilind Asia provides TE’s products and also value added services. Heilind Asia supports both original equipment …

Hanwha TechwinCollects Two NPI Awards for Its Cutting-Edge Modular Mounter and Screen Printer at APEX

Hanwha Techwin Automation Americas, formerly Samsung C&T Automation, today announced that it has received two 2019 NPI Awards in the categories of Component Placement – High-Speed for its HM520 Cutting-Edge Modular Mounter and Screen/Stencil Printing for the ESE US-2000XF. The awards were presented to the company during a Tuesday, Jan. 29, 2019 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO.With the HM520 Modular Mounter, actual productivity is highest among machines of the same class and is optimized to high quality production. The system configures a flexible production line by applying a modular head and various production modes. The HM520 realizes unmanned, non-stop, and zero-defect production using the Smart Factory S/W Solution.The high performance HM520 offers a compact foot print, auto-calibrating maintenance free feeders, and modular heads. The HS(High Speed) Head offers a 20 Spindle x 2 Gantry, 80,000 CPH, ±25 μm @ Cpk ≥ 1.0, 0201 ~ …

Siemens partners with TIES, a Chinese R&D Center to develop new technologies for electric vehicle batteries

Advanced Battery Technology Innovation Center (ABTIC) is initiated jointly by Tianmu Lake Institute of Advanced Energy Storage and Siemens to develop advanced battery technologies and help bring them to volume productionABTIC aims to develop and provide digital solutions for production chains and innovation chains on next generation batteriesSiemens Digital Industries Software has partnered with Tianmu Lake Institute of Advanced Energy Storage Technologies (TIES), a major Chinese energy storage research and development center, to build an Advanced Battery Technology Innovation Center. The Innovation Center, to be located at the 500 million-yuan, 51,000 square meter TIES facility in Liyang, China, will be dedicated to transforming and upgrading the advanced battery industry, including nurturing advanced battery technology research and development, and the development and introduction of high-end talents in this growing area.The Innovation Center will provide the advanced battery innova…